AirHop AirSlides: What a Landing-Bag Slide Really Costs
On 17 November 2026, AirHop Shrewsbury announced two indoor slides that end in an inflatable bag. One is a twister. The other is a near-vertical launch that sends the rider into the air before the bag catches them.
Riders collect a dry friction mat at the bottom, climb to the platform and drop. The park sets a minimum age of four. The release says the slides have carried “tens of thousands” of riders since they were installed in June.
Shrewsbury is a conversion rather than a new build. The venue traded the Go Jump In name for AirHop’s and gained the slides as its first physical change under the new brand. That detail matters, because the buyer here already owns a trampoline hall, an airbag and a tumble track.
The announcement gives no platform height, no run length, no lane count, no bag size and no cost. Those are the numbers a buyer needs, because a landing-bag slide is not a taller flume. It is a platform, a bag with a blower, a queue and an attendant, and all four have to fit inside a hall that is already leased.
What follows is the arithmetic behind that fit, using published figures where they exist and marked assumptions where they do not.
1. What the announcement actually establishes
The published facts are narrow but specific. Two slides, one twister and one launch, both ending on a “giant inflatable Airbag”. A dry friction mat is issued for each descent. The minimum age is four. The slides sit alongside wall-to-wall trampolines, an Airena air-tracked football pitch, a separate airbag, a soft play area and a cafe.
The session structure matters for anyone modelling capacity. Open Jump runs for 60, 90 or 120 minutes and starts every 30 minutes. Toddler Takeover covers ages one to six, and Family Takeover drops the minimum age to one for an hour at weekends. The Monday SEN session runs at capped capacity with no music and reduced lighting, and carers enter free. After school, one paid hour buys three, Monday to Thursday in term time.
Listed pricing is £13.95 per session and parties from £19 per head. The published term-time timetable adds up to about 42 open hours a week, with Wednesday closed.
| Item | What the operator published | What it did not publish |
|---|---|---|
| Slides | Two: a twister and a near-vertical launch | Platform height, run length, number of lanes |
| Landing | “Giant inflatable Airbag” | Bag dimensions, blower rating, arrest distance |
| Rider rule | Ages four and over, dry friction mat | Design rider mass, weight limit |
| Throughput | “Tens of thousands” since June | Rides per hour, queue time, peak headway |
| Site | Trampolines, Airena pitch, airbag, soft play, cafe | Floor plan, platform position, exit route |
| Cost | Nothing | Equipment, installation, structural work |
AirHop has not published a floor plan, and this article is not going to invent one. The operator’s own website returned a server error for the whole of this writing session, so the park’s price page could not be cross-checked against the third-party listings quoted above. Treat those prices as listed, not confirmed.
Most of those gaps close in an afternoon, because a buyer can measure a hall and count lanes. Two do not. Bag specification and structural loading need a supplier’s test report and a structural engineer, and those two decide whether the project runs on budget.
2. Exit speed comes from the drop, not from the rider
Sliding is close to free fall with friction subtracted. The speed at the lip depends on the vertical drop and the losses on the surface, and not on the mass of the person sliding. A 20 kg four-year-old and a 90 kg adult leave the same lip at the same speed, because the force that accelerates them and the inertia that resists both scale with mass.
The ideal case is a clean conversion of potential energy into motion. Real slides lose some of it to friction between the mat and the surface, to the transition at the lip and to air drag at the speeds involved here.
v = sqrt(2 × g × h × e) v = exit speed in m/s, g = 9.81 m/s², h = drop in m, e = energy retained (0.7 assumed below) KE = 0.5 × m × v²
With 30% of the energy lost to friction and transitions, a six-metre platform delivers about 9.1 m/s at the lip, which is 33 km/h. A four-metre platform delivers 7.4 m/s. An eight-metre platform delivers 10.5 m/s.
| Drop | Ideal exit speed | At 0.7 energy retained | Kinetic energy, 60 kg rider | Kinetic energy, 20 kg rider |
|---|---|---|---|---|
| 4 m | 8.9 m/s | 7.4 m/s (27 km/h) | 1,648 J | 549 J |
| 5 m | 9.9 m/s | 8.3 m/s (30 km/h) | 2,060 J | 687 J |
| 6 m | 10.9 m/s | 9.1 m/s (33 km/h) | 2,472 J | 824 J |
| 7 m | 11.7 m/s | 9.8 m/s (35 km/h) | 2,884 J | 961 J |
| 8 m | 12.5 m/s | 10.5 m/s (38 km/h) | 3,296 J | 1,099 J |
The last two columns explain a rule that looks arbitrary until you run the numbers. Age decides who can carry a mat up a staircase, wait for a signal and hold a landing position. Mass decides what the bag has to absorb. A four-year-old arrives at adult speed with a third of the energy, so the age rule protects the descent, and the bag still has to be designed for the heaviest permitted adult.
Go from six metres to eight and the speed rises 15%, while the energy rises 33%, because kinetic energy scales with the square of speed. That is the first place a slide budget goes wrong: the extra two metres of platform look like a small structural change and behave like a large bag change.
Where this model came from: the velocity and energy figures are calculated, not measured. The 0.7 retention factor is an assumption for a mat on a fibreglass run with a transition at the lip. A supplier should be able to quote a measured exit speed for a specific profile; without that number, every downstream figure is an estimate.
3. The bag is the part that gets under-specified
A bag does not stop a rider. It decelerates them over a distance. That distance sets the load on the body far more than the drop does, which is why two slides of the same height can feel completely different at the bottom.
a = v² ÷ (2 × s) a = deceleration in m/s², v = exit speed, s = arrest distance in m Load in g = a ÷ 9.81
| Arrest distance | 6 m drop, 9.1 m/s | 8 m drop, 10.5 m/s |
|---|---|---|
| 0.8 m | 5.2 g | 7.0 g |
| 1.0 m | 4.2 g | 5.6 g |
| 1.2 m | 3.5 g | 4.7 g |
| 1.5 m | 2.8 g | 3.7 g |
Two things follow. First, arrest distance is the specification that matters, and it is a bag property, not a slide property. Second, a bag that is fine at six metres is not automatically fine at eight, because the same 1.2 m of travel has to absorb 33% more energy.
Volume is the other half of the bag. A landing bag of 4 m by 6 m by 0.9 m holds 21.6 m³ of air. Every landing displaces some of it, and the blower has to put it back before the next rider arrives. At a free-air delivery of 1,200 m³/h, replacing 3 m³ takes about nine seconds. Those numbers are illustrative, but the mechanism is not: the bag’s recovery time can become the real minimum headway between riders, and recovery time is almost never printed on a datasheet.
3.1 Which standard applies depends on where you build
The slide and the bag are covered by different documents, and in one market the bag may not be covered at all. In the UK and the EU, the run is play equipment assessed under EN 1176-3, which covers slides, and an inflatable bag is inflatable play equipment under EN 14960-1. In the United States, ASTM F2374 governs inflatable amusement devices, and its published scope explicitly excludes inflatables that need a sudden loss of air to perform their function, naming stunt-bag style impact attenuation devices as the example. A slide landing bag sits close to that exclusion. Commercial trampoline courts, meanwhile, fall under ASTM F2970.
This article deliberately quotes no dimensional limits. The thresholds differ between editions and jurisdictions, and a number copied from the wrong edition is worse than no number at all. What a buyer should ask for is narrower: the standard the unit was tested to, the edition, the testing body, and the report rather than the certificate. The site’s own safety standards page sets out how those documents are checked on our side.
The gap worth naming is the interface. A slide with a bag landing is a hybrid: the run is one product, the bag is another, and the geometry between them, meaning the exit height, the gap and the landing zone, belongs to neither document in full. Ask the supplier which standard covers that junction, and get the answer in writing before the deposit.
4. Height does not set the footprint; the profile does
Two slides with the same platform height can occupy very different amounts of floor. A launch profile is short and steep. A hill profile is long and shallow. Both may top out at six metres, and the difference between them is several metres of run, which becomes several metres of building.
| Profile | Run length | Maximum platform height |
|---|---|---|
| Launcher | 9–11 m | up to 7 m |
| Tornado | 9–10 m | up to 5 m |
| Spiral | 10–11 m | up to 6 m |
| Half-pipe | 11–12 m | up to 5 m |
| V-drop | 12 m | up to 7 m |
| Hill rider | 16–17 m | up to 6 m |
| Snake | 19–20 m | up to 8 m |
| Banana | 20 m | up to 7.5 m |
These are published profiles from one fibreglass slide supplier, and the spread is the point: at a six-metre platform you can specify a run of ten metres or of sixteen and a half, on the same drop and, in the ideal case, the same exit speed. In practice the longer run loses more to friction, which is why the profile changes the ride as well as the floor.
Turn that into floor. A 13 m run on a 6 m drop projects 11.5 m horizontally. Add three metres of platform, six metres of bag and two metres of clear exit, and the slide occupies a strip 22.5 m long. At seven metres wide, including the stair and the queue lane, that is about 158 m², or 1,700 sq ft. Choose a 10 m launcher instead and the horizontal projection drops to 8 m, which shortens the strip to 19 m and the area to roughly 133 m². The profile choice is worth about 25 m² of rent before anyone has picked a colour.
The stair is the part that gets drawn last and built first. A six-metre rise on a comfortable 32-degree pitch needs 9.6 m of horizontal run, which is why slide platforms end up in corners, with a switchback stair that doubles the width of the structure but halves its length.
Two building checks belong at this stage, not later. The first is clear height at the lip: the platform, the rider’s arc and any structure above it all compete for the same void, and that is the number that decides whether a six-metre slide is possible in your hall at all. Our guide to ceiling height as the first gate covers how to measure it. The second is the slab: a platform on four legs is a set of point loads, not a distributed load, and a leased floor may not have been designed for them. The mechanics are set out in floor load and the slab.
5. The queue is a staffing number, not a physics number
Start with one rider alone in the building. Climbing six metres takes twenty-odd seconds at a family pace. The ride itself lasts three to four seconds. Getting off a bag takes longer than people expect, because the rider sinks, rolls and stands, and that is eight to ten seconds. Walking back to the stairs takes about 24 seconds. The full loop is under a minute.
Now add a second rider and the constraint changes. One rider at a time is the rule on a single lane, so the headway between departures is set by how long the bag takes to settle and how quickly the attendant can release the next person.
| Headway between riders | Hourly capacity | What produces it |
|---|---|---|
| 8 s | 450 | Physics only, with a spotter at the top and a catcher at the bag |
| 12 s | 300 | Fast loading, mat handed up, bag checked by eye between riders |
| 20 s | 180 | One attendant who walks the bag edge each cycle |
| 30 s | 120 | Attendant also managing the queue and the stair |
| 45 s | 80 | Published band for a permanent open slide |
| 60 s | 60 | Single attendant running the whole attraction |
The published band from a supplier of permanent slides is 60 to 80 riders an hour for an open fibreglass unit with one attendant, which corresponds to a 45 to 60 second headway. The physics allows five times that. The gap is not the slide; it is the discipline of loading, the position of the attendant and whether the bag is checked between riders or after every fifth one.
The operator’s own claim is consistent with the band, and that is all it is. “Tens of thousands” since June covers anything from 20,000 to 99,000 rides. Spread over roughly 1,014 open hours on the published timetable, that is 20 to 98 rides per hour, which brackets a well-run single lane without proving one. An operator who wants to know their own number should count a Saturday, not read a press release.
For a buyer, the practical consequence is that a throughput claim should come with its conditions: how many attendants, what headway, whether the figure counts re-rides, and whether it was measured or modelled. A slide sold on a theoretical capacity will under-deliver on the first busy weekend.
6. What a slide does to a 60-minute session
Sessions are the unit of inventory in a trampoline park. AirHop sells 60, 90 and 120 minutes, with starts every 30 minutes, so the slide’s real question is not how many people it can take in an hour, but how much of a session it can absorb before the queue becomes the experience.
Assume a session of 120 jumpers, which is a plausible occupancy for a mid-sized hall, and two slide rides per user for those who use it at all. Three participation rates produce three very different loads.
| Slide participation | Rides in one session | Rides needed per minute | One lane at 45 s headway | Result |
|---|---|---|---|---|
| 30% | 72 | 1.2 | 1.33 per minute | Absorbed inside the session |
| 45% | 108 | 1.8 | 1.33 per minute | About 21 minutes of demand spills into waiting |
| 60% | 144 | 2.4 | 1.33 per minute | Second lane or timed slots needed |
The spill figure comes from the same arithmetic in reverse. At 80 riders an hour, 108 rides take 81 minutes, so 21 minutes of demand has nowhere to go inside a 60-minute session and becomes queue. That is the moment a signature attraction turns into the reason a family leaves early.
There are three honest design responses. Add a second lane, which roughly doubles the capital and the floor area and halves the pressure on headway. Sell the slide as a timed slot, which caps demand but adds a booking step at reception. Or fold it into open jump at no extra charge, which keeps the experience simple and accepts a queue at peak.
None of these changes the hall’s occupant load, which is set by egress and the fire strategy rather than by attractions. What changes is where people stand. A bag at the end of a run creates a standing crowd in a place that previously had none, and that crowd is what a fire officer will ask about. How that crowd changes occupant load and egress is worth reading before the layout is frozen, not after.
7. The costs that stay off the equipment quote
The equipment quote covers a slide and a bag. It rarely covers the four items below, and those are the ones that decide the payback.
7.1 The attendant
A launch slide needs a person at the bag for as long as it is open. At an assumed £12.50 an hour, eight hours a day, six days a week, that is £100 a day, £600 a week and £31,200 a year. At the listed £13.95 ticket, that wage bill needs 2,237 admissions a year to cover itself, which is about 43 a week. At £15 an hour the figure rises to 2,684 tickets; at £11 it falls to 1,968.
That is the reassuring number, and it is also the trap. The attendant is cheap compared with the floor. The 158 m² strip from section four is the expensive line, and it is paid monthly whether or not anyone queues.
7.2 The mats
Dry friction mats are consumables. They wear at the edge where riders grab them and at the base where they contact the run. A park should count them at handover, set a replacement interval in rides rather than months, and keep a spare set, because a slide with three mats and a queue is a slide that closes at 2 pm on a Saturday.
7.3 The bag’s running costs
A bag means a blower, and a blower means power, noise and a failure mode. If it stops, the attraction stops, so the plan needs a spare blower or a written procedure for closing the slide without closing the park. Patch repairs and an annual inspection belong in year one’s maintenance budget, not year three.
7.4 The building works
Platform legs need fixing points, and a leased slab needs landlord consent for drilling and for a plinth. If the platform lands on a suspended floor, the structural check comes before the order, not after delivery. Getting this wrong is expensive in a specific way: a plinth poured in the wrong place means either moving the bag or capping the ride, and both are closures.
What the release cannot tell you: whether any of this was difficult at Shrewsbury. The venue already had an airbag and a tumble track, so the operator was adding a product to a building that had passed its structural and fire checks once. A park starting from an empty shell faces a different order of work.
8. Where the swap pays, and where it does not
The case for a landing-bag slide is strongest where the building already works. A rebranding park with a six-metre void, a spare strip of floor and one attendant it can redeploy gets a signature attraction for the price of equipment and installation, with no new lease and no new egress strategy. That is close to the Shrewsbury situation.
The case is weakest in a low hall. Below about five metres of clear height at the lip, the platform and the rider’s arc start to compete with the structure above, and the slide either shrinks to a profile nobody queues for or does not fit.
| Condition | What to specify | Cost of skipping the check |
|---|---|---|
| Clear height under 5 m at the lip | Do not specify a launch profile | Platform built, slide capped, floor lost |
| 5–7 m clear, 120–160 m² spare strip | One lane, 45 s headway, one attendant | Queue at peak, complaints at reception |
| Peak slide use above 50% of session capacity | Two lanes or timed slots | Session time lost to waiting, refunds |
| Long narrow unit with a short available run | Short launcher profile, 9–11 m run | Profile does not fit, bag lands in a route |
| Suspended or leased floor | Structural check before order | Plinth relocation, landlord delay |
| Existing park adding one attraction | Slide plus mat stock plus blower spare | Closure on the first busy Saturday |
What is genuinely unknown is the commercial return. There is no public dataset that isolates the revenue a slide adds to a UK trampoline park, and no published injury rate for airbag slide landings in this market. Anyone offering either number is offering a supplier’s estimate. What can be counted is cost: the attendant, the floor, the mats and the bag.
A park that already runs an airbag will recognise the logic in foam pit versus airbag: the landing medium is a maintenance and staffing decision as much as a safety one. A slide simply concentrates that decision into a single point at the end of a run.
9. Summary
AirHop Shrewsbury added two airbag slides to an existing trampoline park and rebranded the venue at the same time. The news is small; the arithmetic behind it is not. Exit speed comes from the drop and is independent of the rider’s mass, while the energy the bag absorbs scales with mass, which is why the age rule and the bag specification answer different questions.
The floor is set by the profile rather than the height, and a six-metre platform can eat 133 m² or 158 m² depending on which run you choose. Throughput is decided by attendants and loading discipline, not by the drop, and a single lane at a 45-second headway delivers about 80 rides an hour, a third of what a 120-person session generates if every guest rides twice.
The costs that decide payback are the attendant, the mats, the blower and the building works. None of them appear on a slide quote, and all of them are predictable before signing.
10. Three Things You Can Do Today
1. Measure the void, not the floor. Take a laser measure to the highest point of the ceiling above the spot where a platform would stand, then subtract the platform and the rider’s arc. If the answer is under five metres, a launch profile is off the table before any supplier visits.
2. Ask for three numbers the datasheet usually omits. Measured exit speed at the lip, arrest distance of the bag, and recovery time between landings. A supplier who can answer all three has tested the unit; one who answers with a height and a photograph has not. Our design and delivery process starts with those figures rather than with a layout drawing.
3. Cost the queue before the slide. Multiply your peak session size by expected slide participation and by two rides, divide by the session length, and compare the answer with 1.33 riders a minute. If the demand is higher, budget a second lane or a timed slot now.
If you are weighing a slide against more trampoline beds, send the hall dimensions and the ceiling section and we will return a layout with the platform position, the bag footprint and the attendant position marked. Accessories and landing media are listed under trampoline park accessories.
FAQ
How much ceiling height does an indoor slide with an airbag need?
There is no single figure, because the requirement is the platform height plus the rider’s arc plus the bag. A six-metre platform needs the six metres, then clear space above the lip for a rider who leaves it at roughly 9 m/s, then the bag at the bottom. Measure clear height at the lip rather than at the roof ridge, and remember that ducts, sprinkler mains and roof steel all reduce it.
Can you retrofit a landing-bag slide into an existing trampoline park?
Yes, and that is what AirHop Shrewsbury did. The retrofit works when three conditions hold: a void tall enough at the lip, a spare strip of floor about 130 to 160 m², and a slab or structure that can take the platform’s point loads. The order of work matters. Structural check first, then platform, then bag position, then egress review.
How many riders per hour can one slide lane handle?
A published supplier band for a permanent open slide is 60 to 80 riders an hour with one attendant, which is a 45 to 60 second headway. The physics allows far more, up to 300 an hour at a 12-second headway, but only with a spotter at the top and a catcher at the bag. Plan on the lower number and treat anything above it as a staffing decision.
Is an airbag landing safer than a foam pit?
They fail differently rather than one being safer in general. A bag spreads the arrest over a controlled distance and gives a consistent surface, but it depends on a blower and needs recovery time between riders. A pit does not need power and does not deflate, but it needs depth, cleaning and regular raking. Neither choice removes the need for supervision at the exit, which is where most incidents at either landing start.
What age should be allowed on a launch slide?
Follow the manufacturer’s user range and the operator’s supervision rules rather than a number copied from another park. AirHop uses four and over for its AirSlides. Age is a proxy for whether a child can carry a mat, wait for a signal and land in position. It says nothing about the load on the bag, which is a mass question and belongs in the bag specification.
Sources
- Shropshire Live, “New AirSlides bring a new kind of thrill to Shrewsbury”, 17 November 2026. shropshirelive.com
- Visit Shropshire, “New AirSlides Bring a New Kind of Thrill to Shrewsbury”, release text dated 17 November 2026. visitshropshire.co.uk
- Club Hub UK, “AirHop Adventure & Trampoline Park Shrewsbury (formerly Jump In)”, attraction listing accessed 19 November 2026. clubhubuk.co.uk
- Day Out With The Kids, “AirHop Adventure & Trampoline Park Shrewsbury”, session lengths, opening hours and listed prices, accessed 19 November 2026. dayoutwiththekids.co.uk
- RH1 Super Slides, “Commercial Indoor & Outdoor Mega Slides”, profile lengths and maximum heights, accessed 19 November 2026. rh1.co
- Airquee, “Airbag Slides”, fibreglass slide and airbag landing configurations, platform heights and lane options, accessed 19 November 2026. airquee.com
- Ginflatables, “Indoor Slides for Family Entertainment Centers: A Commercial Equipment Guide”, supplier throughput estimates used as a vendor claim only. ginflatables.com
- ASTM International, “F2374 Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices”, scope clause 1.2.4 on excluded devices. astm.org
