Trampoline Park Electricity Bill: What a kWh Costs in Europe
The same 30,000 sq ft (2,787 m²) trampoline park pays €49,731 a year for electricity in Spain and €110,062 in Ireland. The building does not change. The opening hours, the courts, the airbags and the operating schedule do not change either.
Both figures come from one calculation: a published consumption benchmark multiplied by Eurostat’s first-half 2026 electricity prices for business consumers, a dataset updated on 19 October 2026. This is a trampoline park electricity cost estimate built entirely from public numbers.
A spread of 2.2x on a single fixed cost is not a rounding error. For an investor comparing Madrid, Milan or Munich, the meter decides more of the annual budget than most design decisions do.
This article shows which Eurostat price band a park of a given size falls into, what the same building costs to run in nine European markets and the United States, and exactly where the published numbers stop being trustworthy. Every formula is given, so each table can be rebuilt with your own area and market.
1. The Spread in One Table
Start with the per-area view, because it survives any change of park size. Applying the published consumption benchmark of 12.1 kWh per square foot per year, the cost of powering one square foot of trampoline park floorspace ranged from €1.66 in Spain to €3.67 in Ireland in the first half of 2026.
| Market | Business price, €/kWh | € per sq ft per year | € per m² per year |
|---|---|---|---|
| Spain | 0.1370 | 1.66 | 17.81 |
| EU27 average | 0.1771 | 2.14 | 23.02 |
| Netherlands | 0.2115 | 2.56 | 27.50 |
| Ireland | 0.3032 | 3.67 | 39.42 |
Four rows are enough to reframe the budget conversation. A 2,787 m² park in Dublin carries an electricity line about €60,300 a year higher than the identical park in Valencia, before a single guest buys a grip sock. No equipment choice in the fit-out moves a fixed cost by that margin.
The sections below unpack where these prices come from, which of them apply to a park of your size, and what the dataset refuses to tell you.
2. What the Eurostat Dataset Actually Prices
Eurostat publishes business electricity prices under the dataset code nrg_pc_205, “Electricity prices for non-household consumers”, twice a year. The first-half 2026 edition, released on 19 October 2026, is the source for every European number in this article. The matching first-half 2025 edition supplies the year-on-year comparisons.
Three definitions in the dataset matter more than the rest:
- Who counts. The series covers non-household consumers, meaning businesses and institutions. A trampoline park is squarely in this population.
- What the taxes include. The figures used here carry the tax code X_TAX: all taxes, levies and non-recoverable charges are in, recoverable VAT is out. That is the correct lens for a VAT-registered operating company, which claws back input VAT.
- How the bands work. Consumers are grouped by annual consumption. Band IB covers 20–499 MWh a year and band IC covers 500–1,999 MWh. Every price below is labelled with its band, because the band is where park size enters the calculation.
The published figure is an all-in average euro-per-kWh price: network charges, energy supply and non-recoverable levies are averaged together. It is a national average of actual transactions in the half-year, not a tariff sheet and not a quote. A specific park negotiating a specific contract will land above or below it.
Why the household price is the wrong comparison: consumer tariffs include recoverable VAT and residential cross-subsidies. Benchmarking a supplier quote against the household rate is one of the most common errors investors make when modelling European utility costs.
3. Which Band Your Park Falls Into
Eurostat does not publish a trampoline-park category, so the bridge from park size to band needs one benchmark: electricity intensity. The most recent public measure is the U.S. Energy Information Administration’s 2018 Commercial Buildings Energy Consumption Survey, in which public assembly buildings consumed a mean of 12.1 kWh per square foot per year (130 kWh per square meter). Our earlier piece on the US side of this calculation explains that benchmark and its weaknesses in detail.
The conversion is one multiplication:
Annual consumption (kWh) = floor area in sq ft × 12.1
A 30,000 sq ft park therefore draws 363,000 kWh a year. The band boundary sits at 500 MWh, which is reached at roughly 41,200 sq ft. That is the single most consequential number in this article: below it, a park prices against band IB; above it, against band IC, where average prices run lower.
| Park size | Floor area (m²) | Annual consumption | Eurostat band |
|---|---|---|---|
| 15,000 sq ft | 1,394 m² | 181,500 kWh | IB (20–499 MWh) |
| 20,000 sq ft | 1,858 m² | 242,000 kWh | IB |
| 30,000 sq ft | 2,787 m² | 363,000 kWh | IB |
| 40,000 sq ft | 3,716 m² | 484,000 kWh | IB, near the boundary |
| 45,000 sq ft | 4,181 m² | 544,500 kWh | IC (500–1,999 MWh) |
| 60,000 sq ft | 5,574 m² | 726,000 kWh | IC |
Two caveats belong next to that table. First, the 12.1 kWh figure is a mean, and the median public assembly building sits at 8.2 kWh per square foot; a minority of heavy users pull the average up. Second, the intensity benchmark is American, and no European dataset publishes service-sector intensity at matching granularity. Treat the band placement as a planning estimate, not a measurement.
Note also that the band floor is 20 MWh a year, reached at about 1,653 sq ft. Every park worth building sits above it, so band IA never enters the calculation.
4. First-Half 2026 Prices, Market by Market
The table below lists the published prices for the EU27 average and eight member-state markets an investor in this sector most commonly screens, in both bands, with the change against the first half of 2025. All figures are euros per kWh, X_TAX basis.
| Market | Band IB, 2026-S1 | Band IC, 2026-S1 | IB change vs 2025-S1 |
|---|---|---|---|
| EU27 average | 0.1771 | 0.1466 | −6.8% |
| Germany | 0.1818 | 0.1572 | −14.2% |
| France | 0.1705 | 0.1299 | −12.1% |
| Netherlands | 0.2115 | 0.1630 | −0.5% |
| Spain | 0.1370 | 0.1160 | −7.2% |
| Italy | 0.1976 | 0.1744 | −1.8% |
| Poland | 0.1828 | 0.1263 | −5.6% |
| Sweden | 0.1342 | 0.1172 | +20.7% |
| Ireland | 0.3032 | 0.2636 | +1.6% |
Three readings stand out. First, the spread across Europe is extreme: Finland posts the lowest band IB price at €0.1162 and Ireland the highest at €0.3032, a ratio of 2.6x inside a single regulatory union. Second, seven of the nine rows fell year on year, with Germany down 14.2% and France down 12.1%; a park renewing a supply contract in those markets is negotiating against a falling reference. Third, Sweden moved the other way, up 20.7% in band IB, which shows how quickly a country-level assumption can age.
Within every market, the IC average sits below the IB average. At EU27 level the gap is 17.2%. That gap is not a discount any park can claim by existing; it reflects what larger consumers paid on average, partly because they buy at scale and partly because they negotiate. It does, however, set the reference point a 50,000 sq ft park should be quoting against.
5. From kWh to Euros: Two Reference Parks
The conversion from published price to annual bill takes two lines:
Annual consumption (kWh) = floor area in sq ft × 12.1 Annual bill (€) = annual consumption × price (€/kWh)
Worked example, EU27 average, band IB: 30,000 sq ft × 12.1 = 363,000 kWh. 363,000 × €0.1771 = €64,287 a year. Converted at the European Central Bank reference rate of 1.1267 dollars per euro (4 November 2026), that is $72,433.
Applying the same two lines to all nine markets gives the table below for a 30,000 sq ft park in band IB.
| Market | Annual bill (€) | Annual bill ($) | € per m² per year |
|---|---|---|---|
| Spain | 49,731 | 56,032 | 17.81 |
| Sweden | 48,715 | 54,887 | 17.45 |
| France | 61,892 | 69,733 | 22.17 |
| EU27 average | 64,287 | 72,433 | 23.02 |
| Germany | 65,993 | 74,355 | 23.63 |
| Poland | 66,356 | 74,764 | 23.76 |
| Italy | 71,729 | 80,817 | 25.69 |
| Netherlands | 76,775 | 86,502 | 27.50 |
| Ireland | 110,062 | 124,006 | 39.42 |
For parks above the 41,200 sq ft boundary, the IC band prices apply. The table below repeats the calculation for a 50,000 sq ft (4,645 m²) park consuming 605,000 kWh a year.
| Market | Annual bill, 50,000 sq ft park (€) | € per m² per year |
|---|---|---|
| Spain | 70,180 | 15.08 |
| Sweden | 70,906 | 15.24 |
| Poland | 76,412 | 16.42 |
| France | 78,590 | 16.89 |
| EU27 average | 88,693 | 19.06 |
| Germany | 95,106 | 20.44 |
| Netherlands | 98,615 | 21.19 |
| Italy | 105,512 | 22.67 |
| Ireland | 159,478 | 34.27 |
Two patterns deserve attention. Doubling the park does not double the bill: at EU27 prices, the 50,000 sq ft park pays €88,693 where two 30,000 sq ft parks would pay €128,574, because the IC band average runs 17.2% below IB. And the country ranking barely moves between bands. Spain, Sweden and the Polish market stay at the cheap end, Ireland at the expensive end, in both.
For context on how the space is used at that size, what a 45,000 sq ft entertainment center actually contains shows the equipment load these bills are paying to run.
6. Where the United States Fits
The American benchmark comes from the EIA’s Electric Power Monthly, data for August 2026, released on 23 October 2026. The US commercial sector averaged 14.47 cents per kWh that month. State averages diverge far more than European country averages: Texas at 8.96 cents, Florida at 11.35, New York at 23.06, California at 30.02.
Converted at the same ECB rate, the US commercial average is about €0.1284 per kWh. The EU27 band IB average of €0.1771 is 38% above it. On identical assumptions, the 30,000 sq ft reference park costs $52,526 a year at the US average, $32,525 in Texas and $108,973 in California.
| Location | Commercial price | Annual bill, 30,000 sq ft park |
|---|---|---|
| Texas | 8.96 ¢/kWh | $32,525 |
| Florida | 11.35 ¢/kWh | $41,201 |
| US average | 14.47 ¢/kWh | $52,526 |
| New York | 23.06 ¢/kWh | $83,708 |
| California | 30.02 ¢/kWh | $108,973 |
The Texas-to-California ratio is 3.3x, wider than the spread between most large European markets. The practical reading: for a park at the planning stage, the utility serving the site can matter as much as the country it sits in. Texas posts the cheapest major-market price in this entire comparison, below even Finland’s €0.1162 band IB average, while California lands above the EU27 average in both bands.
The US tables in our earlier electricity piece extend this to ten states and to the three levers that move consumption itself.
7. What the Data Does and Does Not Show
This section is the boundary of the calculation, stated plainly.
What the data shows. The average all-in price, including non-recoverable taxes and levies and excluding recoverable VAT, that business consumers in a given country and consumption band actually paid in a given half-year. The figures are transaction-based, published by the EU’s statistical office, and reproducible by anyone from the dataset.
What it does not show. Five things, each of which can move a real invoice:
- Demand structure. The published price is an average per kWh, not an invoice breakdown. Two markets with the same energy price can bill a peak-hung park very differently once capacity and demand components are itemised. The dataset does not break these out.
- Contract position. A fixed two-year supply contract signed in a falling market can sit well above the half-year average by mid-term. The averages describe the past half-year, not the next one.
- European intensity. The 12.1 kWh per square foot benchmark comes from a US survey of 2018 conditions. No European dataset publishes service-sector electricity intensity at matching granularity, and climate, building codes and opening-hour norms differ. A European park’s true consumption may run above or below the American benchmark, and the direction is not published anywhere we could verify.
- Currency. The dollar columns use one ECB reference rate, 1.1267 on 4 November 2026. They exist to let a USD-budgeting investor compare markets and would shift with the exchange rate.
- Band membership. The IC average is not an entitlement. It describes what consumers in the band paid on average; a specific park’s negotiated price is a separate outcome.
Because of the third point, the tables are best read as a screening layer: they rank markets reliably, but the absolute bill for a specific building needs the building’s own load profile, which only a meter or an engineer’s model can supply.
8. Decision Rules for a Build
Rules, not forecasts. Each one follows from a number already shown.
1. Size the band before you request quotes. Below about 41,200 sq ft, benchmark supplier offers against band IB; above it, request and negotiate against IC pricing. The 17.2% EU27-level gap between the bands is an indication of negotiating room, not a promised discount.
2. Benchmark against X_TAX band prices, never against household tariffs. Residential prices carry recoverable VAT and would inflate the comparison by a fifth or more in most markets.
3. Put the half-year price into the site-selection model next to rent and payroll. The dataset refreshes every six months; the second-half 2026 edition is due around spring 2027. A number this sensitive to timing does not belong in a spreadsheet cell that no one revisits. The same by-market logic applies to the other big fixed line, the labour pool a park hires from.
4. Stress-test with the formula, not with intuition. Annual bill = area in sq ft × 12.1 × price. A 2-cent move per kWh on the 30,000 sq ft reference park is €7,260 a year, roughly the annual cost of a part-time floor manager. The five-year maintenance bill responds to the same kind of arithmetic.
5. Match contract length to the market’s direction. In markets where the 2026 first-half price fell hard against a year earlier (Germany −14.2%, France −12.1%), avoid locking a long fixed contract at an average that has already moved without re-quoting. Where prices rose (Sweden +20.7% in band IB), a fixed-price contract carries real option value.
6. Let electricity differentiate only where it clearly does. The Netherlands (+19% above the EU27 IB average) and Ireland (+71%) clear that bar; Spain, Sweden and Finland sit far below it. In markets near the average, rent and wages will decide the location long before the meter does. That headroom logic echoes what European households can actually spend on recreation.
If the site is still on the drawing board, the utility bill belongs in the feasibility model from day one, not in the month-one surprises. Our design-to-delivery process puts cost modelling at the point where the floor plan is still negotiable.
FAQ
How much electricity does a trampoline park use per year?
Apply the published benchmark: floor area in square feet × 12.1 kWh. A 20,000 sq ft (1,858 m²) park therefore consumes about 242,000 kWh a year, and a 30,000 sq ft park about 363,000 kWh. The 12.1 kWh per square foot figure is the mean for US public assembly buildings in the EIA’s 2018 Commercial Buildings Energy Consumption Survey; the median in that category was 8.2, so a lightly loaded park can land well below the mean.
What is the average business electricity price in Europe in 2026?
In the first half of 2026, the EU27 average was €0.1771 per kWh for consumers using 20–499 MWh a year (band IB) and €0.1466 for consumers using 500–1,999 MWh (band IC), on an X_TAX basis: all taxes and levies included, recoverable VAT excluded. The figures come from Eurostat dataset nrg_pc_205, updated on 19 October 2026.
Which European country has the cheapest electricity for a trampoline park?
In band IB, Finland posted the lowest first-half 2026 price at €0.1162 per kWh, with Sweden (€0.1342) and Spain (€0.1370) next among the large markets. Ireland was the most expensive at €0.3032, 2.6x Finland. Band IC rankings are similar: Finland €0.0918, Spain €0.1160, Ireland €0.2636.
Does the Eurostat price include VAT and demand charges?
The X_TAX figures include all taxes, levies and non-recoverable charges but exclude recoverable VAT, which a VAT-registered operating company reclaims. Demand and capacity charges are not shown separately: the published figure is an all-in average per kWh, so a park whose invoice itemises peak-demand components can differ from the average in either direction.
How do I estimate my park’s electricity budget before choosing a site?
Multiply floor area in square feet by 12.1 to get annual kWh, then multiply by the band IB price for your market from the table in section 4. Run the same calculation at plus and minus 2 cents per kWh to see the stress range. If your park exceeds roughly 41,200 sq ft, redo the estimate with band IC prices and negotiate supply on that reference.
Sources
- Eurostat, “Electricity prices for non-household consumers – bi-annual data” (dataset nrg_pc_205), updated 19 October 2026 — ec.europa.eu/eurostat/databrowser/view/nrg_pc_205
- Eurostat, “Electricity price statistics”, Statistics Explained, accessed 5 November 2026 — ec.europa.eu/eurostat/statistics-explained
- U.S. Energy Information Administration, Electric Power Monthly, Tables 5.3 and 5.6.A, “Average Price of Electricity to Ultimate Customers”, data for August 2026, released 23 October 2026 — eia.gov/electricity/monthly
- U.S. Energy Information Administration, 2018 Commercial Buildings Energy Consumption Survey, public assembly building tables, published December 2022 — eia.gov/consumption/commercial
- U.S. Energy Information Administration, Form EIA-861M monthly electric power industry report, state-level data — eia.gov/electricity/data/state
- European Central Bank, euro foreign exchange reference rate, US dollar, 4 November 2026 — ecb.europa.eu
- NinescapeLand, “Trampoline Park Electricity: 12.1 kWh a Sq Ft, Three Levers”, October 2026 — the US-side companion to this article — ninetrampoline.com
